3pcs Emuge Tap 1/4-28 UNF 3 Flute 2B/3B Spiral Flute BU533200.5043 Vanadium

Description

Lot  3pcs
Emuge tap
BU533200.5043
1/4-28 UNF 3 Flute 2B/3B Modified Bottoming Spiral Flute Tap
Vanadium High Speed Steel, Oxide Finish, 3.15" OAL, Right Hand Flute, Right Hand Thread
MULTITAP™
Spiral Flute - UNC/UNF - NE2: BU533200.5043
MultiTAP will cut a wide range of material including carbon steel, steel alloys, stainless steel, aluminum and copper. This all purpose design is well suited to the job shop, short run tapping environment.
Designed for blind hole applications
2B/3B class of fit tolerances
Form C (2-3 P) chamfer length
NE2 Surface Treatment
-
Oxidation
-
In a special installation, the tools are exposed to hot steam. This leads to the formation of a dark oxide layer on the tool surface. This oxide layer protects the surface, and acts as a good carrier of lubricants. Cold welding which occurs especially with low-carbon, soft steels, can be prevented in this way.
DIN / ANSI
taps made with Emuge’s trademark long shanks-
DIN length for extra reach and ANSI shanks
SPECIFICATIONS
Part Number
BU533200.5043
Alternative Part Numbers:
BU539300.5043
Name
MultiTAP™
Inventory
USA - Yes
Germany - No
Description
1/4-28- MultiTAP - Blind Hole - NE2
Size
1/4"
Pitch
28
Chamfer Form
C
Chamfer
2 -3 P
Thread Standard
UNF
Thread Limit
2B/3B
Type
MultiTAP
Coolant Fed
No
Coating
NE2
Material
HSSE
Flutes
3
Flute / Helix Angle
35°
SHANK
0.255"
Dimension Standards
DIN/ANSI
Shank Tolerance
h9
Overall Length
3.15"
Thread Length
0.669"
Flute Direction
RH
Cutting Direction
RH
Tap Square
0.191"
BUYING THIS ITEM YOU WILL GET 3PCS OF TAP EMUGE
BU533200.5043